These pages provide documentation related to the Trafficware line of products The selections on the left side of this screen will list the .pdf title that can be selected from the ,pdf list located below this table.
| Tech Note File | Description | |
| tn1000.pdf | The Naztec NTCIP Protocol | |
| tn1001.pdf | Light Rail Vehicle Preemption (LRVP) | |
| tn1002.pdf | 980 Controller Overview Status Screen | |
| tn1004.pdf | Setting Up the Garmin GPS Interface in a 980 Secondary v61.x Controller or a 2070 v65.x Controller | |
| tn1005.pdf | Programming a TS2 Ver 61.x Controller for First-Time Field Usage | |
| tn1006.pdf | Setting Up IP addresses in a StreetWise System and Associated Field Devices | |
| tn1008.pdf | Updating (Loading) Software to Flash Memory | |
| tn1009.pdf | Converting a Naztec 980 Serial Controller to an Ethernet Controller | |
| tn1010.pdf | Installing Network Software on a TS2 Ethernet Board | |
| tn1011.pdf | Installing Software on a Naztec ATC Controller via the USB Port | |
| tn1012.pdf | Communicating with the Serial Ports using a Naztec ATC Controller | |
| tn1013.pdf | Backing up and Restoring User databases to the ATC | |
| tn1014.pdf | Software Installation Instructions for Linux Operating Systems Hardware | |
| tn1015.pdf | Software Installation Instructions for OS9 Operating Systems Hardware | |
| tn1016.pdf | Licensing Considerations for V76.x or V80.x Software | |
| tn1017.pdf | Setting Up a GPS Interface with controllers using V76.x or V80.x Software | |
| tn1018.pdf | 170 Controller Host/Engine Board Interface and Setup | |
| tn1019.pdf | Setting up an ATC V5 Engine Board to run 10 MBPS | |
| tn1101.pdf | NTCIP Coordination By Example | |
| tn1102.pdf | Twice Per Cycle Left-Turns | |
| tn1103.pdf | The Permitted Lag Left-Turn Display | |
| tn1105.pdf | Flashing Yellow Arrows using Overlaps | |
| tn1106.pdf | “HAWK” Pedestrian Signal System | |
| tn1106-8Chan.pdf | “HAWK” Pedestrian Signal System- 8 Channel | |
| tn1107.pdf | Setting up Confirmation Lights for Emergency Vehicle Preemptions on a 980 controller | |
| tn1108.pdf | Pedestrian Safety Clearance Extension Timing | |
| tn1109.pdf | Traffic Signal Performance Measures for the ATC | |
| tn1118.pdf | Transferring Traffic Signal Performance Measure data | |
| tn1110.pdf | Special Function Output Setup by Time of Day | |
| tn1111.pdf | Method for increasing the intensity of LED Street Lights upon activation of Pedestrian Detectors | |
| tn1112.pdf | Network Communication to a Commander, ATC or 2070 Controller | |
| tn1113.pdf | Modifying Telnet on a Trafficware 2070-1C CPU | |
| tn1114.pdf | Peer to Peer Network Setup Considerations | |
| tn1115.pdf | Modifying the FTP or Telnet Password on a Trafficware 2070-1C CPU or 980 ATC | |
| tn1116.pdf | Transit Priority Programming and Engineering Considerations | |
| tn1117.pdf | Lead / Lag Phasing Considerations | |
| tn1200.pdf | Independent Pedestrian Overlap Considerations | |
| tn1201.pdf | V80.x Ring and Concurrency Programming Considerations | |
| tn1202.pdf | Setting up a controller to interface with an ATC Cabinet | |
| tn1203.pdf | Setting up a Go Bar Overlap Using Scout | |
| tn1204.pdf | Setting up Preemption Service Delay using Scout | |
| tn1204_5K.pdf | Setting up Preemption Service Delay using V80.5 | |
| tn2001.pdf | Setting Up Chronomax Pager Service | |
| tn2002.pdf | Chronomax Pager Verification Unit Tips | |
| tn2003.pdf | Solar Power Assembly Troubleshooting | |
| tn2005.pdf | A "Quick" Method for Early Dismissals | |
| tn2006.pdf | Internal / External Flasher Selection | |
| tn2007.pdf | Using the Internal DC Flasher | |
| tn2008.pdf | Interfacing ATMS.now with Ethernet Interface Device | |
| tn3010.pdf | NTCIP Database Guidelines Part I | |
| tn3011.pdf | NTCIP Database Guidelines Part II | |
| tn3013.pdf | How to Use "Inhibit Phases" to Avoid the "Yellow Trap" | |
| tn3020.pdf | Understanding the StreetWise File System | |
| tn3021.pdf | Setting Up the GIS Interface in StreetWise or ATMS.now | |
| tn3031.pdf | Master and Isolated Communications Configuration for TS2 and 2070 Controllers | |
| tn3032.pdf | Modem Communications Basic Settings | |
| tn3033.pdf | Setting up the Commander/ATC/2070 Hardware binding for Communications | |
| tn3034.pdf | Customizing Auxiliary Inputs and Outputs via the C1 connector on a 2070 with APOGEE v65 | |
| tn3035.pdf | Customizing Auxiliary Inputs and Outputs via the C11 connector on a 2070 with APOGEE v65 | |
| tn3100.pdf | Setting Up Remote Desktop Access for ATMS. now Clients that use Windows XP | |
| tn3101.pdf | Setting Up Remote Desktop Access on the ATMS.now Communications Server | |
| tn3102.pdf | Interfacing ATMS.now with Internet Explorer 8 | |
| tn3103.pdf | ATMS Data Files | |
| tn3104.pdf | Registering V76 Software | |
| tn3105.pdf | ATMS Alarm and Event Considerations | |
| tn3106.pdf | ATMS Line Segments and Geofence Considerations | |
| tn5001.pdf | BIU Troubleshooting Checklist | |
| tn5002.pdf | Detector BIU Setup for Controllers using V76.x | |
| tn6001.pdf | Loop Detector General Discussion | |
| tn6002.pdf | TS1 vs. TS2 Detectors as related to BIU's | |
| tn6005.pdf | Setting up a Type 170 Cabinet Detector Rack with Naztec Video Detection | |
| tn6006.pdf | Setting up Naztec Video Detection to a TS2 or 2070 controller via a Serial Interface | |
| tn6007.pdf | Updated Pod Installation Procedure | |
| tn6201.pdf | Field Installation Tips for a Naztec Temperature Probe | |
| tn7001.pdf | Modeling 4-Phase Diamond Interchange Operation With Synchro / SimTraffic |